Surgical Stainless Steel Ring Opening Pliers. These pliers open outwards to assist in opening rings to insert/remove clip-in balls. Gentle hand grip recommended. Measurement (from end to end handle to tip of nose): 18cm
The Wildcat Ring Opening Pliers are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. The helve is gripped to avoid slipping while in usage. With these pliers all kinds of clip-in rings can be opened with only a small amount leverage.
Surgical Steel Small Ring Opening Plier designed for operater with small hands. Please see Specifications for care of tools. Please Note: The smallest internal diameter ring that these pliers are suitable for is 10mm.
The Wildcat Skindiver Tweezers are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. This tool is designed to hold the base of Skindivers and come in a two different grip sizes. The 2.3mm sizes is for 2.5mm discs, while the 2.7mm sizes is for 3mm discs.
The Wildcat Offene Oval Tweezers are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. These tweezers have an oval open-ended tip.
The Wildcat Micro Duval Clamps are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. The inside oval of these duval clamps measures approximately 8mm x 5mm.
The prefect tool to help with inserting Dermal Anchors. Made of 316L Surgical Stainless Steel, it has a 1.2mm (16ga) threaded end which is suitable or 1.6mm (14ga) internally threaded jewellery and is 90mm in length to enable a solid hold.
Make threading bioplast easy with these Bioplast Threading Pliers! With two grooves, you can either cut a 1.2mm (16ga) or 1.6mm (14ga) thread into Bioplast stems.
Important Compatibility NoticeInvictus M0.8 internally threaded labret bases are engineered specifically for Invictus M0.8 threaded gold tops and are compatible ONLY with M0.8 threading. These bases are not interchangeable with M0.9 threading or non-Invictus threaded tops.
Modern and striking, the 14KT Gold Pyramid Top combines clean lines and faceted angles for a bold yet refined finish. The geometric shape catches and reflects light from every direction, adding subtle dimension and shine. Featuring M0.8 threading with extended threading length, it delivers a smooth, stable, and durable fit across all Invictus gold bases. Pin Size: 0.45mm x 4.7mm.
▸ A versatile design that pairs beautifully with other minimalist or textured tops, ideal for nose , conch, flat, helix, tragus, or lobe , mouth & lip piercings.
▸ Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring durability, alignment, and long-term wearability.
▸ The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base.
▸ All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT Gold and Titanium M0.8 labret bases.
14Kt Gold Part Numbers:⦁ 18g 2.5mm labret base: 14KTDLB1806B25, 14KTDLB1808B25, 14KTDLB1810B25⦁ 18g 3mm labret base: 14KTDLB1806B3, 14KTDLB1808B3, 14KTDLB1810B3⦁ 16g 3mm labret base: 14KTDLB1606B3, 14KTDLB1608B3, 14KTDLB1610B3
Titanium Part Numbers:⦁ 18g 3mm labret base: TITDPINL806, TITDPINL808, TITDPINL810⦁ 16g 3mm labret base: TITDPINL608, TITDPINL610
This item is shipped pre-sterilized utilizing hydrogen peroxide H₂O₂. For more information, please refer to the FAQ section.
Material:
14Kt Yellow Gold
Jewelry Type:
Decorative, Internally Threaded
Threading:
M0.8
14g Stainless Steel Insertion Taper for Internally Threaded Jewellery
Use this stainless steel taper for inserting internally threaded jewellery with accuracy and precision. The taper measures 4" long and 14g (~1.6mm) at its thickest point; the threading at the end is 1.2mm.
Specifications:
Material: 316L ASTM F-138 Implant Grade Stainless Steel
Gauge: 14g (~1.6mm) at thickest part of taper
Taper Length: 10cm
Threading: Internal 1.2mm
Used for inserting internally threaded jewellery and dermal anchors
The Steel Highline Taper Pin is a helping tool for inserting internally threaded piercing jewellery. It is available in two sizes, 1.2mm (16ga) and 1.6mm (14ga), both of which have a length of 50mm.
The Wildcat Small Ring Closing Pliers are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. This tool makes it possible to close rings that have been opened a little too much. With only a small amount of leverage rings up to 2.4mm (10ga) can be pushed together without harming the jewellery.
The Wildcat Professional Ring Opening Pliers are from Wildcat's range of premium clinical grade tools made from surgical stainless steel and with the highest level of finish and precision. The helve is gripped to avoid slipping off while in usage. With these pliers clip-in rings can be opened with only a small amount of pressure.
Colossal Ring Opening Pliers
A heavy-duty tool for opening larger-gauge body jewellery rings — segment rings, captive bead rings, and other ring styles where the gap needs to be widened to insert or remove a ball, segment, or hinged closure.
These are precision pliers, not generic hardware tools. The jaws sit inside the ring and apply force evenly to spread the gap open, which means they need to be sized correctly to your ring before use. Setup is quick, and once set, the pliers do the work.
Specifications
Suitable for rings up to 8mm thick (gauge)
Adjustable to fit rings with an internal diameter of 10mm to 30mm, in 2mm increments
Allen key included for adjusting the jaw size
Solid steel construction
How to use
Check your ring's internal diameter. This is the distance across the inside of the ring (not the outside). It's listed in the product description for every ring on our site.
Set the jaws to match. Use the included allen key to adjust the jaws to the size closest to your ring's internal diameter. The pliers are marked in 2mm increments — pick the marking that matches, or the nearest one below it.
Place the jaws inside the ring. The closed jaws should sit snugly within the ring, with the ring's gap (or hinge, for hinged rings) positioned between them.
Squeeze the handles firmly. The jaws will spread outward, gently opening the ring at the gap. Apply steady pressure rather than forcing it.
Insert your jewellery component (ball, segment, etc.), then release the pliers. The ring will return close to its original shape; finish closing by hand, or with closing pliers if needed.
Important notes
These pliers are rated for rings up to 8mm thick. Heavier gauges than this require industrial-grade tools and fall outside the product's specification.
Correct jaw sizing is essential. The pliers work through precision fit between the jaws and the ring's internal diameter. Without the correct setup, the jaws can't grip the ring properly and won't spread it open — no matter how hard you squeeze the handles. Always check the allen-key adjustment before use.
Heating rings before opening (in hot water or otherwise) is not necessary and doesn't compensate for incorrect jaw sizing.
What's included
1 × Colossal ring opening pliers
1 × Allen key for jaw adjustment
