The Thin Edge Tunnel from the Titanium Highline range is made of premium quality Titanium and is available from 2mm up to 22mm (in 1mm increments) and then from 24mm up to 30mm (in 2mm increments). They all are 8mm in width. These particular tunnels are not only internally threaded but have a 'slimline' edge, a much thinner rim than normal tunnels. Perfect for the larger lobes where something lightweight is required.
These Clinical Grade Surgical Stainless Steel straight clamps are approximately 145mm in overall length. The surface of the holding end tapers to a small tip and is ribbed for maximum grip.
Made from premium grade G23 surgical titanium, these micro threaded balls are available in plain polish (ti-glo) and in a range of great anodised colours! Perfect for replacments or in combination with our many stems or posts to create a new item!Thread Compatibility: 1.2mm (16ga)Ball Diameter: 3mmColour options: Dark Blue (DB), Dark Green (DG), Light Blue (LB), Purple (PU), Rainbow (RB), TiGlo (TG)
Thanks to the rounded-square titanium bases that feature two large holes, these anchors make for extremely secure dermals, effectively allowing for exceptional long term healing. Best suited for regions with thicker skin. 1.6mm stem thickness and available in 2mm, 2.5mm and 3mm stem heights, base measures 4mm x 8mm
The Titanium Blackline Ball Nostril Stud is made of premium quality titanium and is the perfect black ball nose stud! It has a 1.0mm (18ga) stem thickness, a pony-tail stem style and a ball diameter of 2.5mm. This product is also available in Titanium Highline (BNS).
These short (25mm) tapers for internally threaded jewellery are perfect for installing new jewellery or piercing smoothly with needle blades. Made from 316L Stainless Steel, these are autoclave safe. Avaliable in 0.8mm and 0.9mm and 1.2mm
Add some sparkle with this Multi Jewelled Barbell. Suitable for most ear piercings, this piece features 5 gems with the largest in the middle, flanked by smaller gems on either side. 1.2mm (16ga) x 6mm Clear Crystal.
This piece features a multi-jewelled setting in the center of the bar. Made from Bright Gold PVD 316L Surgical Stainless Steel, this industrial barbell is also available in 316L Surgical Stainless Steel. Bar thickness is 1.2mm (16ga)
This tool has notched tip that will allow you to hold dermal tops from 3mm up to 6mm in size. These are perfect for inserting dermal anchors because they only grip the side of the dermal top, thus making it easier to insert.
Steel Jewelled Wrap Around Nose Stud. Available in Steel, Bright Gold PVD, Rose Gold PVD, and Black Steel PVD, This Dog Leg nose stud measures 0.8mm (20ga).
The Titanium Highline Open Nose Ring is made of premium quality titanium and is a fantastic solution when looking for a nose ring! By having a gap in the ring and a disc end, these nose studs can easily be inserted and removed.They are available in 1.0mm (18ga), 1.2mm (16ga) and 1.6mm (14ga) ring thicknesses and in 7mm or 9mm internal diameters.This product is also available in Titanium Blackline (KNR), Steel Basicline (ONR) and Titanium Zirconline (GNR).
The rubber rings are used to fix various types of ear jewellery (Plugs, Top Hats, Single Flared Eyelets and Flesh Tubes as well as others such as spirals and crescents from the Wildcat ranges. It is always advisable to order these replacements with the original items, just so you have a replacement at hand in case! Available in white as well (under the product code ORC).
GSJ Titan Zirconline Jewelled Threaded Ball The balls for the externally threaded barbells of the Titan Zirconline are available with classy rhinestones. too! The balls are available in different combinations of diameter. threadsize and colour. Available stone colours are: aurora boreal (AB). Amethyst (AM). Blue Zircon (BZ). Capri Blue (CB). Crystal Clear (CC). emerald Green (EG). light Blue (LB). sapphire Blue (SB) and Red (RE). Available combinations: Thread: 1.0 mm Colour: AM. BZ. CB. CC. EG. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. AM. BZ. CB. CC. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. CC. LB Ball: 4.0 mm Thread: 1.6 mm Colour: AB. AM. BZ. CC. EG. LB. RE. SB Ball: 4.0 mm Thread: 1.6mm Colour: AB. AM. BZ. CC. LB. EG. SB Ball: 5.0 mm Thread: 1.6 mm Colour: AB. BZ. CC. EG. LB. SB. RE Ball: 6.0mm During the coating of our jewellery by the physical vapour deposition system a thin and abrasion-resistant coat is laid on the jewellery. It complies around the Titan like a covering. without needing any further processing. The advantage of this kind of colour adaption to Black (Titan Blackline) and gold (Titan Zircoline) is. that the characteristics of the Titan are not influenced by its coloration. The biocompatibility is ensuRed. as this process is also used in the medical science (e.g. for implants). The article can. like all basics. be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons. This article is also available in the Titan Highline (XSJ) and in the Titan Blackline (KTJ).
These titanium dermal anchor components feature a circular shaped base which results in an extremely secure fit. They have a 2mm stem height and a 1.6mm (14ga) stem thickness (with a 1.2mm thread size), so you can combine it with any of our dermal attachments!
The Screw in Ball Ring from the Titanium Highline range is a fantastic heavy gauge option! As a lookalike to the Ball Closure Ring, it's ball screws into the ring which means that fitting the ball is quick and easy. It is made of premium quality Titanium! The following sizes are available: Ring Thickness 4.0mm (6ga) is available in 12, 15, 19 and 22mm diameters Ring Thickness 5.0mm (4ga) is available in 15, 19 and 22mm diameters Ring Thickness 6.0mm (2ga) is available in 15, 19 and 22mm diameters Ring Thickness 7.0mm is available in 15, 19 and 22mm diameters Ring Thickness 8.0mm (0ga) is available in 15mm diameter Ring Thicknesses of 9mm, 10, and 12mm are available in a 19mm diameter This article is also available in the Steel Basicline (SIB) and as a Monster Ring (MON) for really large sizes.
316L Surgical Stainless Steel Fake Ear Plugs with a picture design set under latex. The two 8mm base plates give the the illusion of wearing an 8mm plug. The Central Locating Stem is 1.2mm (16ga) and they are supplied with two O Rings.SOLD INDIVIDUALLY and cannot be autoclaved.
Add some sparkle with this Triple Jewelled Barbell. Suitable for most ear piercings, this piece features 3 clustered gems. 1.2mm (16ga) x 6mm Clear Crystal.
The Titanium Zirconline Labret Stud is made of premium PVD coated titanium. With a 1.6mm (14ga) stem thickness, these labrets are available in lengths from 5mm up to 10mm (in 1mm increments).br>This article is also available in Titanium Blackline (KLS), Titanium Highline (XLS), Steel Basicline (LAB) and in Steel Blackline (KLZ). If you are looking for an alternative to titanium and steel, we suggest our BioPlast line (e.g. WAB).
The Titanium Blackline Micro Labret Stud is made of premium quality titanium with a PVD coating. Accept nothing but the best when you buy from the Titanium Blackline range, it is the original black body jewellery!This product has a 1.2mm (16ga) stem thickness and is available in stem lengths from 5mm up to 10mm (in 1mm increments) as well as 12mm.This product is available in Titanium Highline (ZLS), Titanium Zirconline (GZL), Steel Basicline (LAB) and in Steel Blackline (KLZ). If you are looking for an alternative to titanium or steel, we suggest our Bioplast line (e.g. WAB).The suitable replacement balls can be found in the Titan Blackline. they are called KTB.
