The Steel Basicline Clip In Ball is made of premium processed material. This ball gets clipped between your closure ring with a ball closure tool.This product is also available in Titanium Highline (TLB), Titanium Blackline (KLB) and in Titanium Zirconline (GCB).
Steel Jewelled Barbell with Double Chain Linked Cross: 1.2mm (16ga) x 6mm. Available in Steel, Bright Gold and Rose Gold finishes. The chain measures approximately 4cm in length.
Highly accurate anthracite Dialmax vernier calipers in durable high performance polymer for all measurement references. Supplied in sliding cases with full operating instruction. Manufactured in Switzerland to the highest technical standards. These professional vernier calipers are easy and quick to use due to the dial gauge and measure up to 150mm.
The Bioplast Threaded Labret Stem is made of premium quality Bioplast and is all ready for you to add your favourite attachment! It comes in a 1.2mm (16ga) stem thickness and in 6, 8, 10 or 12mm stem lengths.This product is available in Black (BK) and Clear (CL). Bioplast is a flexible synthetic material that has been proven to be bio-compatible. Do not autoclave over 120 degrees.
Titanium Threaded 6.60mm Flower Top available for M.09/16g or M1.2/14g Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Prong Set Gems. This Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewellery. Fully autoclavable.
The Titanium Highline Jewelled Threaded Ball is made of premium quality Titanium. It is available in different combinations of thread size and diameter: Thread: 1.0mm (18ga) - Diameter: 3.0 mm Thread: 1.2mm (16ga) - Diameter: 2.5, 3, 4mm Thread: 1.6mm (14ga) - Diameter: 4, 5, 6mm Thread: 2mm (12ga) - Diameter: 5, 6mm Choose your favourite twinkling rhinestone out of 17 different colours!
Externally ThreadedThis article is also available in the Titanium Blackline (KTJ), Titanium Zirconline (GSJ), Steel Basicline (SJB) and Steel Blackline (KXJ)!
The Titanium Blackline Rattle Balls are completely unique to the Wildcat range! These attachments are made of titanium and are actually hollow but contain a heavy spherical ball. This encapsulated ball is three times heavier than the titanium outer, therefore with movement it causes a resonance throughout the barbell. Excellent for tongues, nipples and intimate areas.These balls are designed for 1.6mm internally threaded stems Available in varying diameter sizes.
The Steel Highline Flesh Tunnel are made of 316L surgical steel and are internally threaded to ensure an easy and smooth insertion.Available in sizes 3mm up to 12mm (in 1mm increments) and then from 14mm up to 20mm (in 2mm increments)
This charming navel is made out of 316L Surgical Steel and sizing 1.6mm (14GA) Thickness, 10mm Length with 5mm Ball. The Jewelled Hollow Heart with CZ Flower Center Navel is a must have this summer.
Beautifully designed Crystal Heart Elephant Dangle Navel comes in two varations, Clear Crystal and Blue. Both are just as lovely. They are made from 316L Surgical Steel and sizing 1.6mm (14GA) Thickness, 10mm Length with 5mm Ball.
Surgical Stainless Steel Disposable Scalpel Blade suitable for use with our Surgical Stainless Steel Scalpel Handle (product code: ESCH).
Blades #10 and #15 are compatible with Handle #03.
Blade #20 is compatible with Handle #04.
Add some sparkle with this Cascading Jewelled Barbell. Suitable for most ear piercings, this piece features 4 gems with the smallest at the top following down to the biggest at the bottom. If you were after the piece to taper from largest jewel to the smallest jewel, we recommend purchasing the opposite side to your piercing in the drop down menu. 1.2mm (16g) x 6mm CZ. Avaliable in a Left (DRP03.L.CZ) and Right (DRP03.R.CZ) side.
The Steel Blackline Mysterium Flesh Tunnels are made of 316L surgical steel with a PVD coating. Externally threaded with a detachable rear disc, they are available from 3mm to 6mm (in 1mm increments) and then from 8mm up to 20mm (in 2mm increments).
The Titanium Highline Disc Nostril Stud is a great option for a flat plain nostril stud. It is made of premium quality titanium, has a 1.0mm (18ga) stem thickness and a top diameter of 2mm.
This wicked Navel of a Dragon Claw holding a black mysterious ball with a Skull Top is made out of 316L Surgical Steel and comes in the colour of Antique Gold & Antique Silver to give it more of a wicked look.Measurements of 1.6mm (14GA) Thickness & 10mm Length.
Steel Jewelled Barbell with Chain Linked Hoop: 1.2mm (16ga) x 6mm. Available in Steel, Black Steel, Bright Gold and Rose Gold. The chain measures approximately 4cm in length, and the hoop is 18ga (1.0mm) thick.
The Bioplast Ball Nostril Stud is made of premium biocompatible Bioplast. It has a stem thickness of 0.8mm (20ga) and has a disc diameter of 2mm, has a pony tail stem style and is available with a Black or a transparent disc.
Titanium Threadless Double Prong Set Gem Top with Rolo Chain Dangle. This Threadless Top is made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g durable Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our Invictus threadless body jewellery line. Chain Length 40mm, Top Diameter 3mm, Pin Size: 0.45mm x 4.7mm.
