Thanks to the rounded-square titanium bases that feature two large holes, these anchors make for extremely secure dermals, effectively allowing for exceptional long term healing. Best suited for regions with thicker skin. 1.6mm stem thickness and available in 2mm, 2.5mm and 3mm stem heights, base measures 4mm x 8mm
Steel Double Linked Prong Set Jewelled Barbell: 1.2mm (16ga) x 6mm. Available in Steel, Bright Gold and Rose Gold finishes. The chain measures approximately 2cm in length.
These Clinical Grade Surgical Stainless Steel straight clamps are approximately 145mm in overall length. The surface of the holding end tapers to a small tip and is ribbed for maximum grip.
The Titanium Highline Open Nose Ring is made of premium quality titanium and is a fantastic solution when looking for a nose ring! By having a gap in the ring and a disc end, these nose studs can easily be inserted and removed.They are available in 1.0mm (18ga), 1.2mm (16ga) and 1.6mm (14ga) ring thicknesses and in 7mm or 9mm internal diameters.This product is also available in Titanium Blackline (KNR), Steel Basicline (ONR) and Titanium Zirconline (GNR).
Invictus Threadless Titanium Dome Attachment.This threadless titanium dome attachment comes in a 2.5mm, 3mm, and 4mm dome size and fits into any Invictus Titanium Threadless Stem. Our titanium threadless dome top is available in multiple sizes for the best look and fit, and is a piece that is easy to use in an ear project or a fresh piercing.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
These Jeweller Quality Plain (Ball or Flat) Nose Studs are made from 925 Sterling Silver and come in two top options (1.7mm diameter ball or disc). They have a 0.8mm (20ga) stem thickness and in both dog leg stem style or straight (flat disc top only).
The classic Ball Closure Ring, made from premium quality PVD coated Titanium and available in many different sizes (both in thickness and diameter). They are extremely versatile making them suitable for various piercings! Combine this product with different clip-in balls from our enormous range!Sizes:1.0mm (18ga) is available in 6, 8, 10 and 12mm diameters.1.2mm (16ga) is available in 6, 7, 8, 10, 12mm diameters1.6mm (14ga) is available in 8, 10, 12, 14 and 16mm diameters2.0mm (12ga) is available in 10, 13, 16 and 19mm diameters2.4mm (10ga) is available in 10, 13, 16 and 19mm diametersThis product is also available in the Titanium Highline(r) (XTR/TUC). Titanium Zirconline(r) (GTR/GBC). Steel Blackline(r) (MBC) and in the Steel Basicline(r) (IMP/BCR). This jewellery is also available with a Clip-In Ball (KBR).
The Titanium Zirconline Jewelled Nostril Studs are made from premium quality Titanium and are available in a 1.0mm (18ga) stem thickness. They have a Pony Tail stem style for a safe and secure fit and are available in 4 popular colours (Clear Crystal, Dark Blue, Light Blue and Pink!
The Bioplast Black Labret is made of Bioplast, a flexible synthetic material that has been proven to be bio-compatible.Available in 1.2mm (16ga) or 1.6mm (14ga) stem thicknesses and in stem lengths of 6mm up to 10mm (in 2mm increments).Being flexible and softer than metal, Bioplast is perfect for labrets and jewellery that will be worn in the mouth as well as for retainers. This product is also available in White (WAB)!
Titanium Moon Threaded Ends 16g or m0.9 laser welded threading. Threads onto 16g m0.9 threaded jewelry. Available only in 5mm size. Manufactured out of Implant Grade Titanium TI-6AL-4V ELI ASTM F136.
The Jewelled Ball Closure Ring from our Titanium Zirconline range is available in a 1.2mm (16ga) ring thickness and has a flat back clip-in attachment making it comfortable for piercings where normally a ball would be uncomfortable. It has a 4mm in diameter clip-in attachment and the ring has an 8mm internal diameter. This product is also obtainable in the Titanium Highline(r) (XCF).
These short (25mm) tapers for internally threaded jewellery are perfect for installing new jewellery or piercing smoothly with needle blades. Made from 316L Stainless Steel, these are autoclave safe. Avaliable in 0.8mm and 0.9mm and 1.2mm
The Thin Edge Tunnel from the Titanium Highline range is made of premium quality Titanium and is available from 2mm up to 22mm (in 1mm increments) and then from 24mm up to 30mm (in 2mm increments). They all are 8mm in width. These particular tunnels are not only internally threaded but have a 'slimline' edge, a much thinner rim than normal tunnels. Perfect for the larger lobes where something lightweight is required.
Invictus Threadless Titanium Prong Set Gem Flower Attachment.This threadless titanium prong set gem flower attachment is avaliable in a 4mm diameter with 7x 1.2mm gems, 5mm diameter with 7x 1.5mm gem and a 5.5mm diameter with 7x 1.5mm gems. Comes in various colours depending on the size, and fits into any Invictus Titanium Threadless Stem. Seven colored cubic zirconia gems make these threadless titanium flowers sparkle like crazy and they are available in so many color combinations, there's a perfect choice for any collection!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
This piece features a multi-jewelled setting in the center of the bar. Made from Bright Gold PVD 316L Surgical Stainless Steel, this industrial barbell is also available in 316L Surgical Stainless Steel. Bar thickness is 1.2mm (16ga)
The Bioplast Banana with surgical stainless steel balls combines the great flexible nature of Bioplast with the classic steel look. With a 1.2mm (16ga) stem thickness, these bananas are available in 8, 10 or 12mm stem lengths. 3mm balls for the perfect balance!
